Fixing Socket With Bent End

1. Description

Fixing Socket with Bent End must not be used for lifting but exclusively for fixing. Fixing sockets are electro-galvanised bichromated. Permissible loads are defined for concrete compressive strength of 25 MPa. To avoid premature failure of the socket by blow-out of the concrete, the socket has to be placed with minimum distances, from the edge and between sockets. Fixing sockets must be used with metric thread screw. They must be screwed on at least one time.

2.Specification

3. Feature &Application

Zinc plated or stainless steel A2, (A4 on request)

M thread

The Fixing Socket with Bent End  is anchored into the concrete unit due to the bent shape.

Additional reinforcement is not required.

Sockets can be used in a wide range of applications.

Fixing Insert w/t bended end is used for the fixing of light weight precast concrete units. Easy to use cause no reinforcement bar required.

4. Details

Fixing Socket with Bent End made of Seamless Precision tube, galvanized, zinc plated finish and cross-hole. Seamless precision tube St 52.3. A rebar must be passed through the cross hole to transfer the load into the concrete. Stainless Steel on request (304 and 316) Dimensions and safe working loads at concrete strength of 25 N / mm²

5. Products Qualification

The Double Head Lifting Anchor is with the certificate of Conformity Quality Management System Certification

6. Package and Shipment

Double Head Lifting Anchor.

Package: Nylon bags then in wooden crate.

Shipment: 15days production after receiving your deposit.

7. FAQ

(1) All inquiries will be responded within 12hours.

(2) Small order is accepted.

(3) Free sample can be sent within 1day.

(4) High quality and competitive price.

(5) Close to Qingdao Port and Qingdao Airport, decreasing the shipment cost.

(6) Know the material trend and know the market better than trade company